YZT-CJ-0510A Laser Range Finder Module
Technical Specification
Overview
The YZT-CJ-0510A Laser Rangefinder is an eye-safe laser rangefinder
within the optoelectronic system, capable of detecting target
distances and transmitting the measured distance to the host
computer via serial communication.
Structural Composition and Main Performance Indicators
The YZT-CJ-0510A Laser Rangefinder consists of a laser, a
transmission optical system, a reception optical system, and a
control circuit. The main performance characteristics are as
follows:
2.1 Ranging capacity
Visibility under visibility conditions is not less than 8km,
diffuse reflectance ≥0.3, humidity ≤80%, the vehicle (2.3m×2.3m
target) ranging distance ≥5km.
2.2 Function
a) single ranging and continuous ranging;
b) Range strobe, front and rear target indication;
c) Self-test function.
2.3 Performance
a. Wavelength: 1535nm±5nm;
b. Laser divergence Angle: ≤0.5mrad;
c. Continuous ranging frequency: 1~10Hz adjustable;
d. Ranging accuracy: ≤±2m (RMS);
e. Accuracy: ≥98%;
f. Minimum measuring range: ≤20m;
g. Ranging resolution: ≤30m (multi-target);
h. Power supply voltage: DC9V ~ 16V; (Customizable)
i. Weight: ≤55g;
j. Power: average power consumption ≤1.5W (1Hz operation), peak
power consumption ≤5W;
k. Size: ≤55mm×41mm×26mm;
l. Working temperature: -40℃ ~ +60℃;
m. Storage temperature: -50℃ ~ +70℃;
2.4 Interface
Communication Interface: RS422, 115200bps, wiring definition as
shown in Table 1;
| Table 1: Wiring Definition for 8P Socket |
| Serial No. | Definition | wire color | Remarks |
| 1 | RS422 RX+ | Brown | RS422 Receive (+) |
| 2 | RS422 RX- | Blue | RS422 Receive (-) |
| 3 | RS422 TX- | Yellow | RS422 Transmit (-) |
| 4 | RS422 TX+ | Purple | RS422 Transmit (+) |
| 5 | GND | White | Communication Interface Ground |
| 6 | +12V | Red | Power Supply |
| 7 | GND | Black | Power Supply Ground |
| 8 | Reserved | Blank | Reserved |
2.5 Dimension
For detailed information, please refer to the product's
three-dimensional envelope and assembly drawing.
User Precautions
The laser emitted by this rangefinder is 1535nm, which is safe for
human eyes. Although it is an eye-safe wavelength, it is advised
not to look directly into the laser.
When adjusting the parallelism of the optical axis, be sure to
cover the receiving lens to avoid permanent damage to the detector
due to excessively strong echoes.
This rangefinder module is not airtight. Ensure that the relative
humidity of the environment is below 80% and maintain a clean and
sanitary environment to prevent damage to the laser.
The range of the rangefinder is related to atmospheric visibility
and the nature of the target. Range will be reduced in fog, rain,
and sandstorms. Targets like green tree clusters, white walls, and
exposed limestone have better reflectivity and can increase range.
Additionally, increasing the angle of the laser beam to the target
will reduce the range.
Do not emit lasers at highly reflective targets such as glass or
white walls within 20 meters to avoid echo overstrength and damage
to the APD detector.
Do not plug or unplug cables while the device is powered on.
Ensure the correct polarity of the power supply connection to avoid
permanent damage to the equipment.
